milKit products offer the simplest solution for tubeless installation and maintenance. We designed our rim tape to be very strong and reliable for an airtight fit, but with enough flex to make installation quick and easy.
Rim tape is needed to ensure air does not escape through holes that are drilled in the rim for spokes.
Choose a rim tape width that matches the inner width of your rim or is slightly larger. The rim tape should cover the whole rim base and it can even cover a part of both sides. Using too narrow rim tape can lead to air leaking between rim and tape – which can be frustrating. If it is too wide it can interfere with the tire seating correctly.
For easy and effective installation:
- Clean rim thoroughly and ensure it is dry
- Install rim tape by pulling it firmly into the rim. It must be tight and ensure there are no gaps or air trapped underneath
- Make sure it overlaps at least 10 cm / 4 in over the valve hole, it’s better to have a longer overlap than shorter
- Use two layers for high pressure wheels (above 8 bar / 120 psi)
- Cut rim tape at a 45° angle for the best adhesion and flexibility
- Install milKit tubeless valves into rim: pinch just a small hole into the rim tape and push valve through tape into rim
Product Information
Choose your roast, grid and frequency to keep ensure every day starts right. Y
Subscribers enjoy up to 20% off our standard coffee price plus from time to time there will be exclusive offers, freebies and competitions.
SAVE MONEY. MODIFY AT ANY TIME. PAUSE, SKIP OR CHANGE
Close all zippers before washing
Wash at max 30°C
Hand washing with cold water (or gentle wash cycle)Using mild, high quality detergent
Drip drying in shade, do not machine dry
Avoiding ironing and bleachThe instructions on your garment’s label
Sorting your clothing by color
Avoiding fabric softener.
Our clothing isn’t meant to be dry cleaned and soaking clothing is not ideal
Storage
Unused sealed sachets should be stored inside the box in a well-ventilated, dry place and protected from moisture, heat and direct sunlight. Can be stored for up to 3 years.
Size
Each sachet contains 30g powder.2 x 30g sachets per carton box.
Makes 2x litres of bike cleaner
100% plastic free packaging
Readily biodegradable ingredients
100% water free
Refill your old bottle and help reduce plastic waste
92% saving in packaging compared to 2 x 1L bike cleaner
100% environmentally friendly ingredients, including plant based raw materials
Supplied in a compostable sachet and printed with vegetable inks
FSC recycled card box containing 2 x sachets – that makes 2L of bike cleaner
Safe on all parts and surfaces including carbon fibre
Will not harm seals, cables, disc brake pads or rotors
Alkaline based and free from alcohol, CFCs, EDTA, solvents or acids
Vegan & vegetarian friendlyCruelty free, not tested on animals
Sachet Instructions
1. Grab your empty old bottle of Muc-Off. (You may need a pair of adjustable pliers to remove the trigger from the bottle). Or purchase our Bottle for Life.
2. Fill up to the shoulders of the bottle with 1 litre of lukewarm water for faster formula activation!
3. Carefully cut one corner of the sachet open along the diagonal cut lines.
4. You can carefully pour the sachet straight into the top of the bottle. Or using the box, fold the inside of the lid together using the printed lines as a guide and use this as a funnel to pour the powder into your bottle. (Please see our video for full instructions on this.
5. Screw your spray trigger back onto the top of the bottle. Ensure it’s tight!
6. Shake the bottle vigorously for 30-60 seconds to activate the formula. If you notice any undissolved powder simply keep shakin’ it!
7. Go clean that filthy bike!
More features
