E-bike rear light
Exposure RedEye-E E-Bike Rear Light
A hard-wired rear light that runs straight off your e-bike's battery, so it is always on and never needs charging. Bright enough for daytime use with a wide red halo for side visibility.
Highlights
Why we rate it
Powered by the bike
Runs continuously from the e-bike system, with nothing to recharge.
Wide visibility
A 240° red halo is visible from over a kilometre away.
Flexible mounting
Round seatpost bracket included, plus an M4 thread to fit a range of Exposure mounts.
Bare-wire connection
Fits most systems with the correct motor-specific connector; fitting by an e-bike mechanic is advised.
Tech specs
Specification
Manufacturer specification. Details may change without notice.
Specification
- Input voltage
- 6V or 12V (motor dependent)
- Draw
- 0.13A at 6V; 0.75A at 12V (per Exposure)
- Cable
- 1.05m fixed, bare wire ends
- Dimensions
- 43.3mm long, 27.1mm head, 18mm body
- Weight
- 44.4g including cable
- Mode
- Solid, always on with motor
- Mounting
- Round seatpost bracket; M4 threaded hole
- Compatible mounts
- EXPQRTRACER, EXPQRTT, EXP18APCLIPSIDE, EXPM5STUDBRKT, EXPTRACECLIP, EXPQRFLASH
- Warranty
- 3 years (bought direct from Exposure); lifetime LED guarantee
Ordering
Available from The Cycle Collective
Available to order through The Cycle Collective in Dorking. For availability, fitting or advice, call 0203 148 6764 or email hello@thecyclecollective.cc.
Product Information
Choose your roast, grid and frequency to keep ensure every day starts right. Y
Subscribers enjoy up to 20% off our standard coffee price plus from time to time there will be exclusive offers, freebies and competitions.
SAVE MONEY. MODIFY AT ANY TIME. PAUSE, SKIP OR CHANGE
Close all zippers before washing
Wash at max 30°C
Hand washing with cold water (or gentle wash cycle)Using mild, high quality detergent
Drip drying in shade, do not machine dry
Avoiding ironing and bleachThe instructions on your garment’s label
Sorting your clothing by color
Avoiding fabric softener.
Our clothing isn’t meant to be dry cleaned and soaking clothing is not ideal
Storage
Unused sealed sachets should be stored inside the box in a well-ventilated, dry place and protected from moisture, heat and direct sunlight. Can be stored for up to 3 years.
Size
Each sachet contains 30g powder.2 x 30g sachets per carton box.
Makes 2x litres of bike cleaner
100% plastic free packaging
Readily biodegradable ingredients
100% water free
Refill your old bottle and help reduce plastic waste
92% saving in packaging compared to 2 x 1L bike cleaner
100% environmentally friendly ingredients, including plant based raw materials
Supplied in a compostable sachet and printed with vegetable inks
FSC recycled card box containing 2 x sachets – that makes 2L of bike cleaner
Safe on all parts and surfaces including carbon fibre
Will not harm seals, cables, disc brake pads or rotors
Alkaline based and free from alcohol, CFCs, EDTA, solvents or acids
Vegan & vegetarian friendlyCruelty free, not tested on animals
Sachet Instructions
1. Grab your empty old bottle of Muc-Off. (You may need a pair of adjustable pliers to remove the trigger from the bottle). Or purchase our Bottle for Life.
2. Fill up to the shoulders of the bottle with 1 litre of lukewarm water for faster formula activation!
3. Carefully cut one corner of the sachet open along the diagonal cut lines.
4. You can carefully pour the sachet straight into the top of the bottle. Or using the box, fold the inside of the lid together using the printed lines as a guide and use this as a funnel to pour the powder into your bottle. (Please see our video for full instructions on this.
5. Screw your spray trigger back onto the top of the bottle. Ensure it’s tight!
6. Shake the bottle vigorously for 30-60 seconds to activate the formula. If you notice any undissolved powder simply keep shakin’ it!
7. Go clean that filthy bike!
More features
