Orbea Orca
Orca M20i TEAM
A lightweight carbon road race bike with a monocoque frame, full-carbon fork and internal cable routing.
Colours
Colour options
Available in 4 factory colours. Orbea MyO custom colours are available on request – ask in store.
Iris White (Gloss) - Lilac (Matt)
Cobalt Blue - Carbon Raw (Matt)
Diamond Carbon View (Matt) - Titan Grey (Gloss)
Escape Green - Carbon View Matt
Orbea Orca
Praise the light
Orca is Orbea's lightweight carbon climbing bike. Orbea quotes 6.7kg for the M10i LTD build, and says the frame is light where it can be and stiff where it needs to be.
Pure light
Weight comes down through attention to detail. Orbea quotes about 745g for an OMX frame and 1,030g for an OMR frame, with 15g of coating, 25g of paint and 40g of hardware.
OMX carbon
Orbea's lightest, stiffest layup, used only on its top performance racing frames.
OMR carbon
The second level of carbon: much of the rigidity and strength of OMX for riders who do not need the ultimate in low weight.
Minimal design
A minimalist seat clamp and derailleur hangers save weight and look clean.
Focus on the shapes
Tube junctions are shaped to remove sharp corners where excess epoxy would collect, cutting weight.
Fewer overlaps
The OMX frame uses fewer carbon pieces and fewer overlaps, which Orbea says saves almost 300g with no change in rigidity.
Aero in the details
The fork and seatpost clamp are shaped to reduce drag without adding weight.
Components
Lightweight components
Parts are chosen for the way they ride as well as their weight.
OC SH-RA10 integrated cockpit
Light, aerodynamic and fully internally routed. Orbea quotes 313g.
OC RP11 handlebar
A stiff, strong carbon bar. Orbea quotes 190g.
OQUO RA57 LTD wheels
A 57mm carbon rim for an aero, lightweight balance, with the Q10 hub.
OQUO RP45 LTD wheels
A 45mm carbon rim balancing aerodynamics and weight.
OQUO RP35 LTD wheels
A 35mm carbon rim, the lightest and stiffest option for climbers.
OQUO Q10 hub
45-tooth, 8° engagement ratchet with ceramic treatment, available on selected LTD wheelsets.
Stiffness and ride
Stiff where it counts, light where it matters
Orbea set a target rigidity first, then made the frame as light as possible without going below it.
Size-tuned stiffness
The carbon layup changes with frame size so every Orca feels the same to ride.
Powerspine
The lower spine of the frame carries most of the twisting and lateral loads and passes power to the rear wheel.
Compliant but efficient
Slim round tubes give compliance on rough roads while the Powerspine keeps pedalling efficient.
Versatile tyre clearance
Clearance for 32C tyres.
Balanced handling
A shorter wheelbase for responsiveness, size-specific fork trail for control, and racing ergonomics.
Base configuration highlights
Base configuration
Orca M20i TEAM build specification
Complete component specification for this build.
Frameset
- Frame
- Orbea Orca carbon OMR 2026, monocoque construction, HS 1,5", BB 386mm, powermeter compatible, Rear Thru Axle 12x142mm, thread M12x2 P1, internal cable routing.
- Fork
- Orbea Orca OMR ICR 2024, full carbon, 1-1/8" - 1,5" tappered head tube compatible, Thru axle 12x100mm, thread M12x2 P1.
- Headset
- FSA 1-1/2" Integrated Aluminium Cup
Drivetrain
- Crankset
- Shimano Ultegra R8100 34x50t
- Shifters
- Shimano ST-8170
- Cassette
- Shimano Ultegra R8100 11-34t 12-Speed
- Chain
- Shimano M8100
- Rear derailleur
- Shimano Ultegra Di2 R8150
- Front derailleur
- Shimano Ultegra Di2 R8150
Cockpit
- Bar plugs
- OC Components
Brakes
- Brakes
- Shimano R8170 Hydraulic Disc
Wheels & tyres
- Wheels
- Oquo Road Performance RP45TEAM
- Front hub
- Orbea Thru Axle 12x100mm M12x2 P1 Lite
- Rear hub
- Orbea Thru Axle 12x142mm M12x2 P1 Lite
- Tyres
- Vittoria Corsa N.EXT 29-622 TLR wide rim G2.0 OEM HP
Components
- Saddle
- Fizik Vento Antares R7 Alloy Rail 140mm
- Seatpost
- OC Performance XP10-S Carbon, 27.2mm, Setback 20
Accessories
- Storage
- OC Toolbox TB02PP
- Side bag
- OC Toolbox TB02PP
Ordering
Available from The Cycle Collective
Available to order through The Cycle Collective in Dorking. For availability, sizing advice or a bike fit, call 0203 148 6764 or email hello@thecyclecollective.cc.
Product Information
Choose your roast, grid and frequency to keep ensure every day starts right. Y
Subscribers enjoy up to 20% off our standard coffee price plus from time to time there will be exclusive offers, freebies and competitions.
SAVE MONEY. MODIFY AT ANY TIME. PAUSE, SKIP OR CHANGE
Close all zippers before washing
Wash at max 30°C
Hand washing with cold water (or gentle wash cycle)Using mild, high quality detergent
Drip drying in shade, do not machine dry
Avoiding ironing and bleachThe instructions on your garment’s label
Sorting your clothing by color
Avoiding fabric softener.
Our clothing isn’t meant to be dry cleaned and soaking clothing is not ideal
Storage
Unused sealed sachets should be stored inside the box in a well-ventilated, dry place and protected from moisture, heat and direct sunlight. Can be stored for up to 3 years.
Size
Each sachet contains 30g powder.2 x 30g sachets per carton box.
Makes 2x litres of bike cleaner
100% plastic free packaging
Readily biodegradable ingredients
100% water free
Refill your old bottle and help reduce plastic waste
92% saving in packaging compared to 2 x 1L bike cleaner
100% environmentally friendly ingredients, including plant based raw materials
Supplied in a compostable sachet and printed with vegetable inks
FSC recycled card box containing 2 x sachets – that makes 2L of bike cleaner
Safe on all parts and surfaces including carbon fibre
Will not harm seals, cables, disc brake pads or rotors
Alkaline based and free from alcohol, CFCs, EDTA, solvents or acids
Vegan & vegetarian friendlyCruelty free, not tested on animals
Sachet Instructions
1. Grab your empty old bottle of Muc-Off. (You may need a pair of adjustable pliers to remove the trigger from the bottle). Or purchase our Bottle for Life.
2. Fill up to the shoulders of the bottle with 1 litre of lukewarm water for faster formula activation!
3. Carefully cut one corner of the sachet open along the diagonal cut lines.
4. You can carefully pour the sachet straight into the top of the bottle. Or using the box, fold the inside of the lid together using the printed lines as a guide and use this as a funnel to pour the powder into your bottle. (Please see our video for full instructions on this.
5. Screw your spray trigger back onto the top of the bottle. Ensure it’s tight!
6. Shake the bottle vigorously for 30-60 seconds to activate the formula. If you notice any undissolved powder simply keep shakin’ it!
7. Go clean that filthy bike!
More features
