Di2 satellite switches
Shimano Di2 SW-RS801 Satellite Shifter Switches
Wired satellite buttons that add extra shift points to 12-speed Dura-Ace, Ultegra and GRX Di2 levers, on the drops, the tops or an aero extension. Each plugs into the lever's dedicated satellite port.
Highlights
Why we rate it
Shift from anywhere
Change gear while sprinting in the drops, climbing on the tops or tucked on aero bars.
Tiny and light
The sprint and tops switches weigh about 3g each and sit almost invisibly under bar tape.
Plug-in fit
Each switch connects to the satellite port on 12-speed Dura-Ace, Ultegra and GRX RX825 levers.
Fully programmable
Assign the buttons in E-Tube Project to whatever shift function suits you.
Tech specs
Specification
Manufacturer specification. Details may change without notice.
Specification
- Model codes
- SW-RS801-S (drops), SW-RS801-T (tops), SW-RS801-E (aero bar)
- Compatible levers
- ST-R9270, ST-R9250, ST-R8170, ST-R8150, ST-RX825
- Not compatible
- 105 Di2 ST-R7170 (no satellite port)
- Wire length
- S 100mm, T 260mm, E 740mm
- Clamp
- S 23.8mm, T 31.8mm, E 22.2mm
- Weight
- S and T 3.1g per switch, E 8.2g per switch
- Buttons
- 1 per switch
- Connection
- Wired, dedicated satellite port on lever
In the box
- Includes
- Sprint and Tops: pair of switches with tape and tie-wrap
- Includes
- Aero Bar: single switch with band
Ordering
Available from The Cycle Collective
Available to order through The Cycle Collective in Dorking. For availability, setup or advice, call 0203 148 6764 or email hello@thecyclecollective.cc.
Product Information
Choose your roast, grid and frequency to keep ensure every day starts right. Y
Subscribers enjoy up to 20% off our standard coffee price plus from time to time there will be exclusive offers, freebies and competitions.
SAVE MONEY. MODIFY AT ANY TIME. PAUSE, SKIP OR CHANGE
Close all zippers before washing
Wash at max 30°C
Hand washing with cold water (or gentle wash cycle)Using mild, high quality detergent
Drip drying in shade, do not machine dry
Avoiding ironing and bleachThe instructions on your garment’s label
Sorting your clothing by color
Avoiding fabric softener.
Our clothing isn’t meant to be dry cleaned and soaking clothing is not ideal
Storage
Unused sealed sachets should be stored inside the box in a well-ventilated, dry place and protected from moisture, heat and direct sunlight. Can be stored for up to 3 years.
Size
Each sachet contains 30g powder.2 x 30g sachets per carton box.
Makes 2x litres of bike cleaner
100% plastic free packaging
Readily biodegradable ingredients
100% water free
Refill your old bottle and help reduce plastic waste
92% saving in packaging compared to 2 x 1L bike cleaner
100% environmentally friendly ingredients, including plant based raw materials
Supplied in a compostable sachet and printed with vegetable inks
FSC recycled card box containing 2 x sachets – that makes 2L of bike cleaner
Safe on all parts and surfaces including carbon fibre
Will not harm seals, cables, disc brake pads or rotors
Alkaline based and free from alcohol, CFCs, EDTA, solvents or acids
Vegan & vegetarian friendlyCruelty free, not tested on animals
Sachet Instructions
1. Grab your empty old bottle of Muc-Off. (You may need a pair of adjustable pliers to remove the trigger from the bottle). Or purchase our Bottle for Life.
2. Fill up to the shoulders of the bottle with 1 litre of lukewarm water for faster formula activation!
3. Carefully cut one corner of the sachet open along the diagonal cut lines.
4. You can carefully pour the sachet straight into the top of the bottle. Or using the box, fold the inside of the lid together using the printed lines as a guide and use this as a funnel to pour the powder into your bottle. (Please see our video for full instructions on this.
5. Screw your spray trigger back onto the top of the bottle. Ensure it’s tight!
6. Shake the bottle vigorously for 30-60 seconds to activate the formula. If you notice any undissolved powder simply keep shakin’ it!
7. Go clean that filthy bike!
More features
