A clamp designed for bicycle repair stands to hold your bike securely and safely. Modern carbon and aero frames are designed to go fast, not to be clamped in a workstand – Hirobel is safe on paint and on carbon.
Workstand pressure clamps were developed for round steel tubing more than 40 years ago, before carbon, aluminium, aero and oversized tubes, integrated seatmasts, dropper posts and suspension. When tubing is not round and straight, a traditional clamp puts very high point loads at its edges, which can damage the finish, damage the carbon layup inside, or crush the lightest tubes.
With Hirobel, specially shaped, paint-friendly cones and bindings cradle the frame at the tube intersections, where walls are thicker and forces spread over a much larger area. It adapts to any frame design, lets you position the stand clamp closer to the bike's centre of gravity (more stability, no bouncing during heavier work) and holds the drivetrain consistently higher for better visibility and less back strain.
Specifications
- Non-marring, paint-safe cones
- Extruded aluminium construction
- Retaining straps for extra security
- Fits most workstands and clamp designs
- Can be used on full-suspension bikes: front cone inside the frame by the headset, second cone under the saddle
SILCA Lifetime Warranty.
Available from The Cycle Collective in Dorking.
Product Information
Choose your roast, grid and frequency to keep ensure every day starts right. Y
Subscribers enjoy up to 20% off our standard coffee price plus from time to time there will be exclusive offers, freebies and competitions.
SAVE MONEY. MODIFY AT ANY TIME. PAUSE, SKIP OR CHANGE
Close all zippers before washing
Wash at max 30°C
Hand washing with cold water (or gentle wash cycle)Using mild, high quality detergent
Drip drying in shade, do not machine dry
Avoiding ironing and bleachThe instructions on your garment’s label
Sorting your clothing by color
Avoiding fabric softener.
Our clothing isn’t meant to be dry cleaned and soaking clothing is not ideal
Storage
Unused sealed sachets should be stored inside the box in a well-ventilated, dry place and protected from moisture, heat and direct sunlight. Can be stored for up to 3 years.
Size
Each sachet contains 30g powder.2 x 30g sachets per carton box.
Makes 2x litres of bike cleaner
100% plastic free packaging
Readily biodegradable ingredients
100% water free
Refill your old bottle and help reduce plastic waste
92% saving in packaging compared to 2 x 1L bike cleaner
100% environmentally friendly ingredients, including plant based raw materials
Supplied in a compostable sachet and printed with vegetable inks
FSC recycled card box containing 2 x sachets – that makes 2L of bike cleaner
Safe on all parts and surfaces including carbon fibre
Will not harm seals, cables, disc brake pads or rotors
Alkaline based and free from alcohol, CFCs, EDTA, solvents or acids
Vegan & vegetarian friendlyCruelty free, not tested on animals
Sachet Instructions
1. Grab your empty old bottle of Muc-Off. (You may need a pair of adjustable pliers to remove the trigger from the bottle). Or purchase our Bottle for Life.
2. Fill up to the shoulders of the bottle with 1 litre of lukewarm water for faster formula activation!
3. Carefully cut one corner of the sachet open along the diagonal cut lines.
4. You can carefully pour the sachet straight into the top of the bottle. Or using the box, fold the inside of the lid together using the printed lines as a guide and use this as a funnel to pour the powder into your bottle. (Please see our video for full instructions on this.
5. Screw your spray trigger back onto the top of the bottle. Ensure it’s tight!
6. Shake the bottle vigorously for 30-60 seconds to activate the formula. If you notice any undissolved powder simply keep shakin’ it!
7. Go clean that filthy bike!
More features
